|
| |
Technical Publications by
Elzly Staff
Elzly Staff have published extensively during their professional career.
Following is a partial list of technical papers published or presented by Elzly
staff in a variety of subject areas (click to skip to that section). Icons
to the left of a publication provide a link to the source. Most sources
provide the publication for free while others may require registration or a fee.
If the paper you are interested in is not available directly, feel free to
contact us.
Bookmarks for Topic Areas:
Environmental Issues
|
Contact
Us |
"Hazardous Materials Reference System (HMRS4)," J.A.
Ellor, K. Evens, and J. Wright, 1995
Aerospace Industries Association, Hazardous Materials Management
Conference, September 1995 |
|
Contact
Us |
“Guide to NAVSEA-Specified
Coatings, Critical Environmental/Worker Safety Regulations and
Regulatory Impacts,” technical report for NAVSEA 03M1, March 1994
|
|
Contact
Us |
“Potential Impact of
Environmental and Worker Health Laws on the Sacrificial Anode Life
Cycle,” technical report for NAVSEA 03M1, June 1993 |
|
Contact
Us |
Marine Paint Specification;
Hazardous Material Study/Upgrade,” technical report for NAVSEA 03M1, April 1993
|
|
Contact
Us |
“A Review of VOC Compliance
at NOS-Louisville,” technical report for Advanced Systems Technology,
Inc., May 1992 |
Return to Top
Highway
 |
"Characterization of Coating Performance in Various
Natural Exposure Environments," Sheri L. Sampson, John Repp, James A.
Ellor, J. Peter Ault, Christopher L. Farschon, and Robert A. Kogler Jr.;
technical paper presented at PACE 2005, Las Vegas, NV |
 |
"Performance of Polymer
Coated Corrugated Steel Pipe," J. Peter Ault, presented at
Transportation Research Board, Washington, D.C., 2003. |
|
|
"Service Life Evaluation of
Corrugated Steel Pipe Storm Water Detention Systems in the Metropolitan
Washington, DC Area," J. Peter Ault, presented at Transportation
Research Board, Washington, D.C., 2003. |
|
|
"Durability of Culverts and Special Coatings,"
J. Peter Ault, FHWA-RD-97-140,Federal Highway Administration, Washington, D.C. January,
2000. |
|
|
"Adhesion Criteria Between Water-Based Inorganic
Zinc Coatings and their Topcoats for Steel," J. Peter Ault,
Christopher L. Farschon. FHWA-RD-98-170, Federal Highway Administration,
Washington, D.C., March 1999. |
|
|
"Evaluation of Water-Based Inorganic Zinc Curing
Under Various Environmental Conditions," J.P. Ault, Dr. S. Chong, C.L.
Farschon, and M. Hamilton; paper presented at the Fifth World Congress on
Coating Systems for Bridges and Steel Structures, University of Missouri-Rolla,
February 1997. |
|
Contact
Us |
“Guidelines for Repair and Maintenance of Bridge
Coatings: Overcoating,” C.L. Farschon, R.A. Kogler, and J.P. Ault, August
1997, FHWA-RD-97-092, 95 p. |
|
Contact
Us |
"Characterization of the Environment for
Weathering Steel Design Considerations," J.P. Ault, C.L. Farschon, and
R.A. Kogler; paper presented at the Fourth National Workshop on Bridge Research
in Progress, Buffalo, NY, June 1996. |
|
Contact
Us |
“Evaluation Methodology for Corrugated Steel Pipe Coating/Invert Treatments,” J.A.
Ellor, J.P. Ault, and K. O’Brien, NCSPA Annual Meeting, Key Biscayne, FL, 1996 |
|
Contact
Us |
"Environmentally Acceptable Materials for the
Corrosion Protection of Steel Bridges," J. Peter Ault, Christopher L.
Farschon, and Robert A. Kogler. FHWA-RD-96-058, Federal Highway Administration,
Washington, D.C., 1996. |
|
Contact
Us |
"Corrosion Control of Highway Structural
Components by the Application of Powder Coatings," J. Peter Ault,
Christopher L. Farschon. FHWA-RD-94-175, Federal Highway Administration,
Washington, D.C., June 1995. |
Return to Top
Marine Coatings
|
|
“Experimentation to Develop a Quantitative Method for Characterizing the
Level of Flash Rusting Formed on Carbon Steel after Ultra High Pressure
Waterjetting,” M. Islam, W. McGaulley, M. Evans, and J. Ellor, technical paper
presented at PACE 2006, Tampa, FL |
|
|
"The Use of Coatings for Corrosion Control on Offshore
Oil Structures," J. Peter Ault, technical paper presented at PACE 2006,
Tampa, FL |
 |
“Investigating Tests for Antifoulants: Variation Between Laboratory and In-Situ
Methods for Determining Copper Release Rates from Navy-Approved Coatings,” J.
Ellor, Journal of Protective Coatings and Linings, Volume 22, Number 8 (August
2005) |
|
Contact
Us |
“Engineer/Constructor Perspective on Preservation Using Waterjetting,” J.
Ellor & J. Gillard, RUST 2004, Louisville, KY |
|
Contact
Us |
"Recent experience with ship and laboratory evaluations of foul-release
coatings," James Rudroff, E. Dail Thomas & James A. Ellor, 10th International
Congress on Marine Corrosion and Fouling (incorporating 2nd U.S./Pacific Rim
Workshop on Emerging Non-Metallic Materials for the Marine Environment), The
University of Melbourne, Australia, 7-12 February 1999 |
|
Contact
Us |
“Novel Methods for Assessing
Anti-Corrosion Coatings for Marine Structures,” J. A. Ellor, K. Cramer, and J.
Repp, paper presented
at US-Pacific Rim Workshop on Emerging Nonmetallic Materials for the Marine
Environment, Honolulu, HI, March 1997 |
|
Contact
Us |
"Performance of Thermally Applied Organic
Coatings in a Marine Atmosphere," J.P. Ault and C.L. Farschon, Materials
Performance, February 1996, Volume 35, Number 2, pages 51-55. |
|
Contact
Us |
"Performance of Thermally Applied Organic
Coatings in a Marine Atmosphere," J. Peter Ault and Christopher L.
Farschon, presented at CORROSION/95, National Association of Corrosion
Engineers, Houston. |
|
Contact
Us |
"Evaluation of Powder Coatings for Shipboard Applications," J.A. Ellor,
NAVSEA, Code 05M1 technical report, September 1987. |
Return to Top
Corrosion Modeling
|
|
"Modeling the Performance of Protective Coatings in
Marine Service," J. Peter Ault and James A. Ellor; paper presented at
MegaRust 2006, Norfolk, VA. |
 |
"Intelligent Agents for Corrosion Prevention in New
Vehicle Design," C. Thomas Savell, Bob Baboian, Pete Ault, Carl Handsy,
Gavin Nunns, Paolo Mosna; paper presented at Corrosion 2003. |
|
Contact
Us |
“Coating
Performance in Various Natural Environments and Accelerated Exposure,” J.A.
Ellor, P.E., J.P. Ault, P.E., C. L. Farschon & J.P. Repp, presented
at SSPC 99, Houston, Texas |
|
Contact
Us |
“Characteristic Corrosion/Coating Deterioration
as a Function of Local Environments,” J.A. Ellor & C.L. Farschon, Presented at SSPC 98 |
|
Contact
Us |
"Statistical Analysis of Pitting Corrosion in
Condenser Tubes," J. Peter Ault, George A. Gehring, Corrosion Testing in
Natural Waters, Second Volume, ASTM STP 1300. ASTM, W. Conshocken PA., 1996. |
|
|
"A Test of the Reliability of Mathematically
Modeling of Corrosion," J. Peter Ault, Jr., J. Meany, Jr., Proceedings,
Corrosion Control for Low-Cost Reliability, 12th International Corrosion
Congress, Houston, Texas, September 1993. |
|
Contact
Us |
"Extreme Value Analysis of Pitting Corrosion,"
J.J. Meany, J. Peter Ault, Jr., Proceedings, Life Prediction of
Corrodible Structures, 3rd NACE International Relations Committee Symposium,
Cambridge, UK, Sept 1991. |
Return to Top
Vehicle Corrosion
|
Contact
Us |
“Corrosion
Durability Testing of Military Vehicles,” I.C. Handsy, P. Decker, J.P.
Ault, J. Repp, CORROSION/ 99, paper no. 494
(Houston, TX: NACE, 1999) |
|
Contact
Us |
“Test and Evaluation of Alternative Paint Schemes for Support Equipment,”
technical report for SEMCOR, Inc., May 1992 |
|
Contact
Us |
"Exposure Testing of Environmentally Acceptable
Coatings for U.S. Navy Ground Support Equipment," T.J. Marchesani, J.P. Ault
and C. Fitch, Proceedings, Tri Services Corrosion Conference, May 1992.
|
Return to Top
Economics
 |
"How Economics Drive Change in Managing Maintenance Costs,"
J.A. Ellor, Presentation at SSPC 2001 Conference, Orlando, FL, SSPC Pittsburgh, PA |
|
Contact
Us |
“Maintenance Cost-Analysis with Protective Coatings/Linings,”
J. A. Ellor, technical presentation at mid-Ohio NACE Corrosion Conference, 1997 |
Return to Top
Surface Preparation
|
|
"Proof of Concept for an Adhesion Measurement Device to
Predict Overcoating Failures in the Field," Moavin Islam, John Repp, and
James A. Ellor; technical paper presented at PACE 2005, Las Vegas, NV. |
|
Contact
Us |
“Allowable Soluble Salt Contamination Levels for Industrial Painting, J.A.
Ellor and C. L. Farschon, SSPC 97-09, San Diego, CA, November 1997. |
|
Contact
Us |
"Evaluation of Selected Maintenance Coatings over Hand and Power Tool Cleaned
Surfaces," J.A. Ellor, R.A. Kogler, and A.R. Parks, Journal of Protective
Coatings and Linings, Vol. 7, No. 12, December 1990. |
Return to Top
Seawater Corrosion
|
|
“Current Demand as a Result of Coating Void to Intact Coating Surface Area
Ratio,” J. Repp & J. A. Ellor, technical paper No. 312 presented at Corrosion
99, San Antonio, Texas, April 1999 |
|
Contact
Us |
"An Analysis of Flow-Induced Corrosion-Erosion
in Piping Systems," J.A. Ellor and L. A. Barker, 17th Annual Electrical Utility Chemistry Workshop, May
13-15, 1997, Champaign, IL |
|
|
"Erosion Corrosion of Nickel Aluminum Bronze in Flowing
Seawater," J. Peter Ault, paper number 281 presented at Corrosion/95. |
|
Contact
Us |
"Corrosion of Nickel-Aluminum Bronze Exposed to High Velocity Seawater," J.A.
Ellor, G.A. Gehring, and A.R. Parks, paper No. 502 presented at CORROSION/91,
Cincinnati, OH, 1991. |
|
Contact
Us |
"Disbondment and Blistering Characteristics of Epoxy-Based Coatings Under
Cathodic Protection in Seawater," J.A. Ellor and T.J. Marchesani, proceedings of
SSPC 91, Long Beach, CA, 1991. |
|
Contact
Us |
"Performance Testing of Indium-Activated Aluminum Anodes in Seawater," J.A.
Ellor and B. Brinckerhoff, paper No. 6587 presented at 23rd Annual Offshore
Technology Conference, Houston, TX, 1991.
|
|
Contact
Us |
"Evaluation of Cavitation-Resistant Coatings for Use on Underwater Hulls,"
J.A. Ellor, presented at the NACE Northeast Regional Meeting, Baltimore, MD,
1989. |
|
|
"Galvanic Corrosion of Copper-Nickel Sheathed Steel Piling," J.A. Ellor and
G.A. Gehring, Materials Performance, Vol. 27, No. 5, May 1988. |
|
Contact
Us |
"Overcoating of Inorganic Zinc Primers for Underwater Service," G.A. Gehring
and J.A. Ellor, Journal of Ship Production, Vol. 4, No. 4, November 1988.
|
|
Contact
Us |
"An Investigation of Water Treatments for Mitigating Sulfide-Related
Corrosion of Copper Alloy Condenser Tubes," G.A. Gehring, J.A. Ellor, and B.C.
Syrett, NACE Conference, Houston, TX, 1986. |
Return to Top
Shipboard Cathodic Protection
|
|
“Electrostatic Modeling of Cathodic Protection Systems,”
J. Ellor, technical paper presented at Corrosion 2006, San Diego,
CA. |
|
Contact
Us |
“SSN-21 Corrosion Control Initiatives,” technical report for NAVSEA 03M1,
April 1996 |
|
Contact
Us |
“Analysis of FCT ICCP System Operation Aboard USS MIAMI (SSN-755),” technical
report for NAVSEA 03M1, February 1994 |
|
Contact
Us |
“Evaluation of DDG ICCP Effectiveness,” technical report for NAVSEA 03M1,
October 1992 |
Return to Top
Miscellaneous
|
|
"An Overview of Pipeline Coating Rehabilitation," J.
Peter Ault and David H. Kroon, JPCL July 2003. |
|
Contact
Us |
“Long Term Corrosion Control by Thermal Spray Metallic Coatings,” J. Ellor,
J. Repp, and W. Young, Tri-Services Corrosion Conference, 2003, Las Vegas, NV
|
|
|
“Quantification of Curing Stresses in Paints and Coatings,” M. Islam, J.
Repp, J. Ellor, & B. Shaw, SSPC 2003, New Orleans, LA |
|
|
"Evaluation of Permanent Reference Cells for Direct
Burial Applications," J. Peter Ault, P.E., John Repp and John Travaglini;
presented at Corrosion 2001. |
|
|
"Service Life Extension of E-28 Arresting Gear Systems,"
David M. Piatkowski, J. Peter Ault, P.E. and John Travaglini, paper
presented at Corrosion 2001. |
|
Contact
Us |
"Uniform (Corrosion)" J.A.
Ellor, Corrosion Tests and Standards: Application and Interpretation,
ASTM Manual 20, ASTM, Philadelphia, PA, 1995.
|
|
Contact
Us |
"Calcite-Type Coatings Applied to Segregated Seawater Ballast Tanks," J.A.
Ellor, NSRP SP-3 Panel Meeting, New Orleans, LA, 1984. |
Return to Top
Corrosion in Concrete
|
|
"Applying Linings to Concrete Surfaces in Water and
Wastewater Environments," J. Peter Ault, T. Kyle Greenfield, and Sasan
Hosein, technical paper presented at PACE 2005, Las Vegas, NV |
|
|
"Thermal Spray for Cathodic Protection of Concrete,"
Stephen F. Daily and J. Peter Ault, JPCL, February 2003. |
Return to Top
Metal Plating
|
Contact
Us |
“Comparison of Aluminum
Coatings Provided by Electroplating and Ion Vapor Deposition to Other
Cadmium Alternative Materials,” Cramer, Keith and J. Peter Ault, U.S. Navy & Industry Corrosion
Technology Working Group Conference, July 1997. |
Return to Top
Copyright © 2006 Elzly Technology Corporation All rights reserved.
Revised: 12/21/07.
|
